NSM Pay Pal Store  theater systems  minimonitors  bookshelf speakers  subwoofers  sub-satellite

 Omnimount Brackets

 NSM AUDIO
h e a r    t h e     p o s s i b i l i t i e s 


 We make the best loudspeakers

Since 1990

NSM Direct Sales

 Clearance Sale  

Prices  

Specifications  

 Reviews 

  Company-Info

   Design 

comments

HOME

M5

  M5S

M7C

M10

 M10S

M12

  M15

  M25

PSM  

EXP  

15EXP 

15EXP-X

EXP-sub-sat

Operating Instructions: EXP And 15EXP

Connections:   
    If you are using a preamp, surround sound processor, or tape outputs on a receiver as sources for the EXP or 15EXP, use shielded cables with RCA jacks to send left and right line level, full frequency signals to the subwoofer. If you are using a Dolby Digital/AC-3 surround processor as your source, use shielded cables with RCA jacks to connect the processor to the left and right line level inputs on the subwoofer. Set the speaker setting for the loudspeakers to the "small" position. The "direct in" switch on the subwoofer should be set to the "on" position to bypass the crossover in the subwoofer.
      The circuits of the subwoofer amplifier combine the left and right input signals and sends the combined signal into the subwoofer amplifier. The line level RCA output connectors provide full frequency line level output to an amplifier or receiver to drive satellite speakers.
     If you are using a power amplifier or receiver to provide speaker level source inputs to the subwoofer, use speaker wires to connect the power amplifier to the left and right speaker level inputs on the subwoofer. Ensure the speaker wires are connected in the same polarity to the amplifier and the subwoofer. The subwoofer left and right speaker level output terminals provide full frequency output to satellite speakers when the speaker level inputs are used.

Placement:
      For the most audiophile response, locate the subwoofer on the same plane between, and slightly ahead of , the front satellite or main speakers. For convenience, the EXP and 15EXP may be located away from the main or satellite speakers. For the most bass reinforcement, locate the subwoofer near to a wall or corner. Engage the phase switch to find the setting that provides the loudest output and coherence with the satellite. In the correct setting the speaker system will sound louder. Adjust the crossover switch to get the best acoustical match with the satellite speakers.

Setting the Bass Level:
      For music systems, adjust the crossover and engage the phase switch to achieve bass
   

 

output that complements but does not overpower the satellite or surround speakers. A lower crossover setting and a volume level that provides seamless integration with the satellite speakers will generally provide the most desirable response. 
      If you are using the EXP or 15EXP in a specialized application such as a recording studio, use professional acoustical measurement equipment to set the desired bass response and level.

Care:
      The subwoofer should be played at moderate volume initially to allow the driver to break in. Always ensure the volume is not set to the maximum level when you turn on your system. Never drag or push the subwoofer, as this will damage the "feet." It is preferable to lift the subwoofer by grasping the port with one hand and the bottom of the subwoofer with the other hand. To clean the fabric surface, lightly vacuum it with a vacuum tip that has soft bristles. The painted surfaces may be cleaned with a solution made of 50 percent water and 50 percent rubbing alcohol. Use a soft tissue or a soft cloth saturated with the alcohol and water solution to wipe the painted panels. Use dry, soft tissue or cloth to dry the panel. Do not buff.

Warranty:
      The EXP and 15EXP active subwoofers are intended for use in the reproduction of music and are warranted against defects in materials or workmanship that occur in normal use for five (5) years from the date of original purchase for the amplifier and for ten (10) years from the date of purchase for other subwoofer components. NSM Audio Co. will repair, replace or adjust defected parts for the original owner without charge for parts or labor, provided the subwoofer is returned at the owner's cost to the dealer from whom the subwoofer was purchased or to NSM Audio Co.
      This warranty does not apply to damage that results from abuse, accidents including those that occur in shipping, and any damage that results from repair or modification by anyone not specifically authorized to make repairs by NSM Audio Co.
      In order to claim coverage under this warranty, you must provide proof of purchase in the form of a sales slip. The warranty gives you specific legal rights, and you may have other rights which vary from state to state.



  e-mail          |         Clearance        |       NSM Direct Sales        |         What's New          |      Omnimount Brackets       |            Home

Surround Placement   |   Alternative Surround Placement    |    Center Channel Placement    |   Stereo Placement   |   Stereo Alternative


NSM AUDIO
 e-mail: nsmaudio@nsmaudio.com    Phone: 919-244-8777    Fax: 206-339-9034
 P.O. Box 13396, Research Triangle Park, NC, USA 27709-3396

copyright 2005     NSM Audio Company

 

 

. . . . . . . . . . . . . . . . . .